If a permit is required, getting it is normally a simple matter of going down to the city workplace with your strategies for the project, having the strategies looked over and paying the license fee. Prior to you get to work, you'll wish to make sure you have an easy method to get rid of your old shingles and roofing debris.
There are a variety of disposal options available, but renting a dumpster for shingles is the most convenient. You'll be able to lease the container for the entire length of your project, and you and your specialist won't need to make multiple trips to the garbage dump, which conserves time and money.
Now it's time to gather the tools you'll need to finish your roof work. The majority of these should be offered in your local house improvement store, but you can also order devices online if needed. Durable ladders Hammer (one per person) Hammer tacker (a minimum of two) Roof nails Staples Plywood sheets (enough to lean against roof jacks, plus numerous additional) Pry bar (at least 2) Adjustable roof jacks (a number of) Chalk line Tarps (several) Garden fork and/or roof shovel (one per person) Press brooms (at least 2) # 30 Roofing felt Ice and water barrier Use thick-soled shoes or boots with excellent grip to keep from slipping while walking around on the roofing.
Because removing shingles will trigger them to shed granules, you should also wear goggles to secure your eyes. And of course, a safety harness is highly recommended when working in such a precarious environment. You wish to make sure that any shingles or nails that miss the dumpster, or other disposal method you're using, don't cause damage to your home.
Lay tarps over shrubs or other landscaping elements around the boundary of your home. Establish your ladders in the area where they are the most stable and the least likely to be bumped by anybody passing by. Finally, set up roofing system jacks, which are steel anchors that fasten to your roofing and hold slabs to stroll on for safety.
Use at least three nails per jack. When the jacks are protected, include plywood boards. This forms a barrier to keep gotten rid of shingles from sliding off the roof, in addition to being a safety measure. Another vital part of roofing system prep is taking into consideration the other methods the shingle elimination will affect your life at home.
Some of the items to be gotten ready for include: numerous levels of noise throughout the duration of the project, safeguarding breakable products from the vibration of building and construction, putting porch/patio furniture and your gas grill away from your house or in the garage, moving your automobile far from the driveway, and protecting any prized possessions saved in the attic with a tarp in case particle particles comes in through wood slots. asphalt roof shingles.
Work your shovel or fork under the ridge caps the shingles at the peak of your roof and pry them loose. Allow them to move down to the jacks. As soon as you've pried up the caps, you'll be working your way down the roofing, getting rid of shingles in 2 to 3-foot areas.
For the moment, don't worry if some nails get left behind in the roof. You'll handle those later. When you have actually worked your way down to the jacks, gather the disposed of shingles and toss them in the dumpster. Note: shingles are heavy. Particularly if you needed to get rid of numerous layers, even a small area's worth of shingles will be very heavy - roof replacements.
Take small armfuls in as numerous trips as needed. You do not wish to risk stumbling and slipping as you move throughout the roofing system. Now go back to the peak and start removing your next 2 to 3-foot area of shingles. Inspect the flashing the slices of material that direct water far from the house for indications of wear.
If any of the flashing shows indications of wear, remove and discard it. If you are keeping your flashing, get rid of the nails and bend it up and back with a pry bar to get rid of the shingles below (replacing shingles). Note: The flashing in valleys and around chimneys and pipes vents normally has the very same life-span as your shingles, so you'll want to remove it.
You'll go back to this step after you've removed all shingles. You've eliminated all the shingles to the jacks on the part of the roofing system you're presently working. Now it's time to get rid of the jacks and take off the last remaining shingles under them. You can set about this in one of 2 ways.