If an authorization is needed, getting it is normally a basic matter of decreasing to the city office with your plans for the job, having the plans examined and paying the authorization fee. Prior to you get to work, you'll wish to ensure you have a simple method to dispose of your old shingles and roof particles.
There are a number of disposal options readily available, but leasing a dumpster for shingles is the most convenient. You'll be able to rent the container for the entire length of your project, and you and your contractor won't have to make numerous journeys to the garbage dump, which saves time and cash.
Now it's time to gather the tools you'll need to finish your roofing work. Many of these should be available in your local house enhancement store, but you can also buy equipment online if required. Durable ladders Hammer (one per person) Hammer tacker (a minimum of 2) Roofing nails Staples Plywood sheets (enough to raid roofing jacks, plus a number of additional) Crowbar (a minimum of two) Adjustable roofing system jacks (numerous) Chalk line Tarpaulins (numerous) Garden fork and/or roofing shovel (one per person) Press brooms (a minimum of 2) # 30 Roof felt Ice and water barrier Wear thick-soled shoes or boots with good grip to avoid slipping while moving on the roof.
Since getting rid of shingles will cause them to shed granules, you should also wear safety glasses to secure your eyes. And naturally, a safety harness is extremely recommended when operating in such a precarious environment. You want to make sure that any shingles or nails that miss out on the dumpster, or other disposal approach you're using, do not trigger damage to your property.
Lay tarpaulins over shrubs or other landscaping aspects around the boundary of your home. Set up your ladders in the location where they are the most steady and the least likely to be bumped by anyone death by. Lastly, established roofing jacks, which are steel anchors that secure to your roofing system and hold slabs to stroll on for security.
Usage at least 3 nails per jack. When the jacks are secured, include plywood boards. This forms a barrier to keep eliminated shingles from sliding off the roof, in addition to being a safety step. Another crucial part of roofing system prep is taking into account the other methods the shingle removal will impact your life in your home.
Some of the items to be gotten ready for include: numerous levels of sound throughout the period of the task, safeguarding breakable items from the vibration of construction, putting porch/patio furniture and your gas grill far from your house or in the garage, moving your automobile away from the driveway, and protecting any valuables saved in the attic with a tarp in case particle particles comes in through wood slots. roof replacement.
Work your shovel or fork under the ridge caps the shingles at the peak of your roofing and pry them loose. Permit them to move down to the jacks. When you've pried up the caps, you'll be working your way down the roof, removing shingles in 2 to 3-foot areas.
For the minute, don't worry if some nails get left in the roofing system. You'll deal with those later on. When you've worked your way to the jacks, gather the discarded shingles and toss them in the dumpster. Note: shingles are heavy. Specifically if you needed to get rid of multiple layers, even a little section's worth of shingles will be really heavy - asphalt roof shingles.
Take small armfuls in as many journeys as essential. You don't wish to risk stumbling and slipping as you cross the roofing system. Now return to the peak and start removing your next 2 to 3-foot section of shingles. Inspect the flashing the thin pieces of material that direct water away from the house for signs of wear.
If any of the flashing shows signs of wear, get rid of and discard it. If you are keeping your flashing, remove the nails and bend it up and back with a crowbar to remove the shingles underneath (roof shingles repair). Keep in mind: The flashing in valleys and around chimneys and plumbing vents generally has the same lifespan as your shingles, so you'll want to eliminate it.
You'll return to this action after you have actually gotten rid of all shingles. You've removed all the shingles to the jacks on the part of the roof you're currently working. Now it's time to eliminate the jacks and remove the last remaining shingles under them. You can set about this in one of two ways.